Product Features :
- USB to RJ45 interface
- USB 2.0 interface with compliant to 1.0 and 1.1
- Full Speed (480 Mbps) USB device
- Integrated Fast Ethernet MAC, Physical Chip and transceiver in one chip
- Supports 10/100 Mbps N-Way Auto-negotiation operation
- Support all USB standard command
- Supports Suspend/Resume detection logic
- Supports Full Duplex Flow Control (IEEE 802.3)
- Half/Full duplex 10/100 Mbps operation
- 18K bytes SRAM built in (2K bytes for Tx buffer and 16K bytes for Rx buffer)
- Uses 93C46 to store resources configuration, ID parameter etc.
- Supports 4 end points : Control end point with maximum 8 byte packet, bulk in end point with 64 bytes/packet, bulk out end point with 64 bytes/packet, interrupt in end point with 8 byte/packet
- Powered directly by USB port. No external power is required.
- LED indicator
System Requirements :
- Available USB port.
- Pentium-233MHz or faster PC.
- 64 MB RAM or more.
- Windows 2000/XP/Vista
Specification :
- Device Type: USB to RJ45 Network Card
- Interface Type: USB
- Dimension: 66 x 20 x 18 mm[!online_only:yes!]
